Hot Products

Hot News

Surfactant

Semi-branched C12-13 Alcohol ethoxylates CAS 160901-19-9

About Semi-branched C12-13 Alcohol ethoxylates:Semi-branched C12-13 Alcohol ethoxylates are easily dispersed or soluble in water and can be used with a variety of cationic, anionic, and non-ionic surf...

Overview of Semi-Branched C12-13 Alcohol Ethoxylates

Semi-branched C12-13 Alcohol Ethoxylates are a type of surfactant produced by the addition reaction of semi-branched C12-13 alcohols with ethylene oxide. Its molecular structure contains multiple ethoxy (- OC2H4-) units, which endow it with hydrophilic properties, while the semi-branched alcohol group endows it with oleophilic properties. Therefore, this compound can form a stable emulsion layer at the oil-water interface and is widely used in fields such as cosmetics, detergents, lubricants, and coatings. Its semi-branched chain structure makes it perform better in some applications than traditional linear alcohol ethoxides, such as better stability and lower irritation.

Features of Semi-Branched C12-13 Alcohol Ethoxylates

Unique semi-branched chain structure: Compared with traditional linear alcohol ethoxides, its semi-branched chain structure endows it with superior physical and chemical properties.

Good hydrophilicity and lipophilicity: Due to multiple ethoxy and semi-branched alcohol groups, a stable emulsion layer can be formed at the oil-water interface.

Excellent stability: It can maintain stable performance in various media and is not easy to decompose or fail.

Low irritation: Good compatibility with skin and other biological tissues.

Widely applicable fields: Widely applicable in various fields such as cosmetics, detergents, lubricants, and coatings.

Environmental restrictions: Although it has various advantages, with the increase in environmental awareness, its production and use are subject to increasingly strict environmental regulations.

Application of Semi-Branched C12-13 Alcohol Ethoxylates

Cosmetics and detergents: used as emulsifiers, stabilizers, or surfactants to make cosmetics and detergents such as lotion, face cream, shampoo, bath gel, etc.

Application of semi-branched C12-13 alcohol ethoxylates

Lubricating oil: As an additive, it improves the stability and performance of lubricating oil.

lubricant

Application of semi-branched C12-13 alcohol ethoxylates

Coatings and inks: Improve the fluidity and stability of coatings and inks and enhance their effectiveness.

Paint and Coatings (2).jpg

Application of semi-branched C12-13 alcohol ethoxylates

Textile printing and dyeing: used as an emulsifier or dispersant in textiles' printing, dyeing, and processing.

Application of semi-branched C12-13 alcohol ethoxylates

Other fields: It also has potential application value in agriculture, environmental protection, energy, and other fields.

Industrial cleaning and maintenance: Used for cleaning and maintaining industrial equipment, ensuring its normal operation and extending its service life.

Why choose us.jpg

Company Profile

NANOTRUN(www.rboschco.com) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.

The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are looking for high-quality semi-branched C12-13 alcohol ethoxylates, please feel free to contact us or click on the needed products to send an inquiry.

Payment Term

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment Term

By sea, by air, by express, as customers request.

FAQ

What are the advantages of semi-branded C12-13 Alcohol Ethoxylates compared to linear alcohol ethoxides?

Answer: Semi-branched C12-13 Alcohol Ethoxylates have better stability and lower irritation than linear alcohol ethoxides due to their semi-branched chain structure. This enables it to provide a better user experience and effectiveness in certain applications, such as cosmetics and detergents.

What is the main role of semi-branded C12-13 Alcohol Ethoxylates in cosmetics?

Answer: In cosmetics, semi-branded C12-13 Alcohol Ethoxylates are mainly used as emulsifiers and stabilizers. It can effectively mix oily and water-based ingredients to form a stable lotion or cream, thus enhancing the texture and stability of the product.

How to synthesize Semi branded C12-13 Alcohol Ethoxylates?

Answer: The synthesis of semi-branched C12-13 Alcohol Ethoxylates is usually achieved through an additional reaction between semi-branched C12-13 alcohols and ethylene oxide. During this process, ethylene oxide molecules will be added to the alcohol molecules individually, forming multiple ethoxy units.

What factors will affect the performance of semi-branded C12-13 Alcohol Ethoxylates?

Answer: The factors that affect the performance of semi-branched C12-13 Alcohol Ethoxylates include the number of methoxyl groups, the degree of alcohol branching, temperature, pH value, etc. These factors will affect its emulsification effect, stability, and compatibility at the oil-water interface.

What are the applications of semi-branded C12-13 Alcohol Ethoxylates in detergents?

Answer: In detergents, semi-branded C12-13 Alcohol Ethoxylates can be surfactants to help remove oil and stains. Its unique semi-branched-chain structure, hydrophilicity, and lipophilicity enable it to combine with oil stains more effectively and disperse them in water, thereby improving the washing effect.

Semi-branched C12-13 Alcohol ethoxylates Properties
Other Names	Polyethoxylated C12-13 straight - chain/branched fatty alcohols
CAS No.	160901-19-9
Compound Formula	RO(CH₂CH₂O)_nH R=C12-13
Molecular Weight	N/A
Appearance	Transparent to milky liquid (there will be stratification)
Melting Point	N/A
Boiling Point	N/A
Density	N/A
Solubility in H2O	N/A
Exact Mass	N/A
Semi-branched C12-13 Alcohol ethoxylates Health& Safety Information
Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

Breakthrough technological innovation: Indium oxide powder enhances the performance of next-generation touch screens

Recently, a certain electronic technology company announced the successful launch of a new technology that uses indium oxide powder to enhance touch screens. This breakthrough technology is expected to promote the development of a new generation of touch screen technology and improve user interaction experience. Indium oxide powder, with the chemical formula In2O3, is an inorganic compound composed of indium and oxygen elements.The pure product is a white or light yellow amorphous powder. Under heating conditions, indium oxide powder will transform into a reddish brown color. Insoluble in water, but soluble in hot inorganic acids. Has good stability at high temperatures, but begins to sublime at around 850 ° C. The In2O3 generated by low-temperature calcination has certain hygroscopicity, but this property disappears after high-temperature treatment. Indium oxide powderSome key advantages of using indium oxide powder for touch screensHigh transparency: ITO can maintain a high degree of transparency, which is crucial for display screens as it allows users to clearly see the image on the screen.Good conductivity: Despite being transparent, ITO still has excellent conductivity. This characteristic enables ITO to transmit electrical signals without blocking light.Chemical stability: Indium oxide has high chemical stability, which means it is not easily reacted with other substances, thus ensuring the long-term stability and durability of the ITO film layer.Mechanical strength and flexibility: ITO film layers can be very thin, but at the same time have a certain level of mechanical strength and flexibility, making them suitable for various types of touch screen devices, including bendable or foldable screens.Easy to process: ITO can be deposited on glass or other substrates through methods such as sputtering, and can be patterned as needed to meet different design requirements.Touch sensitivity: The high conductivity of ITO ensures that the touch screen is highly sensitive to user input, thereby improving the user experience.Environmental tolerance: ITO coating can resist wear and tear in daily use and the influence of some environmental factors, such as humidity and temperature changes, which helps to extend the service life of touch screens. About RBOSCHCORBOSCHCO is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, RBOSCHCO dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Indium oxide powder, please send an email to: sales1@rboschco.comHot tags:semiconductor, semiconductor material

Aug 13

2024

New Food Packaging Material: Sodium Silicate Helps with Food Safety and Extended Shelf Life

In recent years, with the increasing awareness of food safety and the pursuit of sustainable lifestyles, the food packaging industry is undergoing a profound transformation. A recent study has shown that a new type of food packaging material has been successfully developed using the unique properties of sodium silicate , which can not only significantly improve the safety of food, but also effectively extend its shelf life. Sodium silicate, commonly known as "water glass", has attracted widespread attention due to its excellent moisture-proof, antibacterial, and biodegradable properties. This new technology fully utilizes the characteristics of sodium silicate and aims to solve many problems in traditional food packaging materials. Sodium Silicate PowderMoisture resistance: Sodium silicate has good moisture absorption properties, which can absorb moisture inside the packaging and prevent food from getting damp and spoiling. This is particularly important for foods that are prone to moisture, such as cookies, nuts, etc.Antibacterial properties: Sodium silicate can inhibit the growth of microorganisms, including bacteria and fungi. This natural antibacterial ability helps reduce microbial contamination in food, thereby extending its shelf life.Enhance the performance of packaging materials: Sodium silicate can be added as a reinforcing agent to packaging materials to improve their mechanical properties, such as enhancing tear and puncture resistance, making the packaging more durable and reducing damage to food during transportation.Biodegradability: When sodium silicate is combined with other biodegradable materials, it can be made into environmentally friendly and effective packaging materials. This material can degrade in the natural environment after use, reducing its impact on the environment.Stabilizing foam and washing aid: In some food packaging processes, sodium silicate can help stabilize foam and act as a washing aid to ensure the cleanliness in the packaging process and indirectly improve food safety.As a desiccant: Sodium silicate can be used to prepare desiccants, such as silica gel desiccants, which are made by reacting sodium silicate with other chemicals and undergoing a series of treatments. These desiccants can absorb moisture from the packaging and prevent food from getting damp.Improving the barrier performance of packaging materials: By adding sodium silicate to improve the barrier performance of packaging materials, it prevents the penetration of oxygen, moisture, and odors, which helps maintain the freshness and original flavor of food.Composite packaging materials: By combining sodium silicate with other materials such as fibers, a new type of composite insulation packaging material can be prepared. This material not only provides thermal insulation, but also has moisture-proof and antibacterial properties. The application of sodium silicate in new food packaging materials marks a leap forward in food packaging technology. By combining its unique physical and chemical properties, researchers are not only able to create safer and more durable packaging solutions, but also take a solid step towards achieving the goal of green packaging. With the continuous maturity and improvement of this technology, we can look forward to a more sustainable and healthy future for food packaging. About RBOSCHCORBOSCHCO is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa,Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, RBOSCHCO dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Sodium Silicate Powder, please send an email to:sales1@rboschco.comHot tags:semiconductor, semiconductor material

Aug 08

2024

SiC power devices help improve the performance of new energy vehicles

A well-known automobile manufacturer has announced the full adoption of SiC power devices in its latest electric vehicles to significantly improve the vehicle's energy efficiency and range. By using SiC MOSFETs and diodes, this model achieves faster charging speed and lower energy loss. Silicon CarbideAdvantages of SiC application in new energy vehiclesImprove energy efficiency and rangeHigher efficiency: SiC power devices such as MOSFETs and diodes have lower on resistance and higher switching frequency, which means they generate less energy loss during operation. This directly translates into higher system efficiency.Increasing driving range: As SiC devices can improve the efficiency of inverters, new energy vehicles using SiC technology can achieve higher energy efficiency, thereby increasing the maximum driving range of the vehicle. For example, inverters using SiC technology can improve efficiency by more than 3% compared to traditional IGBT inverters, increasing the vehicle's range by 9 miles or more.Reduce system size and weightCompact design: SiC devices can provide greater power density in smaller sizes, which means inverters and other power electronic components can be made smaller and lighter. This is a significant advantage for electric vehicles that pursue compact design.Increasing interior space: The smaller size of the inverter gives designers more freedom to optimize the layout of the vehicle's interior space, thereby increasing passenger and cargo storage space.Improve thermal managementBetter thermal conductivity: SiC materials have higher thermal conductivity, which means they can dissipate heat more effectively. This is particularly important for power electronic devices in electric vehicles, as they need to operate continuously in high temperature environments without affecting performance.High temperature resistance:SiC devices can withstand higher operating temperatures, which allows them to maintain good performance even in high-temperature environments, reducing the need for cooling systems and further reducing the weight of vehicles.Improve switch speed and reduce lossesFaster switching speed: SiC devices can perform switching operations at higher frequencies, which helps reduce switching losses in inverters.Reduce current loss: SiC devices generate lower losses during the switching process, which means more energy can be effectively utilized instead of being lost as heat.Improve reliabilityHigher voltage resistance: The rated voltage of SiC based devices is much higher than that of similar silicon-based devices, which means they can operate stably at higher voltages.Longer service life: Due to the low loss and high temperature resistance characteristics of SiC devices, they typically have a longer service life.The application of SiC technology in new energy vehicles not only helps improve the overall performance of the vehicle, but also reduces operating costs, while providing greater flexibility for vehicle design. About RBOSCHCORBOSCHCO is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, RBOSCHCO dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Silicon Carbid , please send an email to: sales1@rboschco.comHot tags:semiconductor, semiconductor material

Aug 01

2024

Enhanced FeAl metal intercalation composite coating by laser cladding of titanium carbide (TiC) powder

Recently, researchers have made significant progress in developing advanced composite coatings using titanium carbide (TiC) powder. This study focuses on the use of TiC powder in laser cladding technology to prepare TiC reinforced FeAl metal intercalation composite coatings, revealing the morphological evolution of primary TiC carbides within the coatings. TiC powder Compared with traditional coatings, TiC reinforced FeAl composite coatings exhibit excellent mechanical properties. Hardness testing and wear resistance experiments have confirmed that the performance of the coating has been enhanced due to the presence of TiC carbides. These coatings exhibit better wear resistance and corrosion resistance, making them suitable for demanding industrial applications. The function of TiC powderStrengthening effect:TiC powder, as a hard particle, plays a strengthening role in composite coatings and can significantly improve the hardness and wear resistance of the coating. The high hardness of TiC enables the composite coating to resist wear and scratches, extending its service life.Improve coating performance:The addition of TiC powder can improve the corrosion resistance of the coating, making it more durable in harsh environments.TiC can also improve the oxidation resistance of coatings, thereby enhancing their stability at high temperatures.Promote the uniformity of the coating:During the laser cladding process, TiC powder can promote the uniform distribution of the coating and ensure the consistency of the coating quality.The addition of TiC powder helps to form a denser coating structure and reduce porosity.Improve bonding strength:TiC powder helps to improve the bonding strength between the coating and the substrate, ensuring that the coating is not easily peeled off. ApplicationIndustrial components:TiC reinforced FeAl composite coating can be used to manufacture industrial components that can withstand high stress and wear, such as engine parts, pump shafts, valves, etc.Aerospace:In the aerospace field, this composite coating can be used to manufacture high-temperature components of aircraft engines, such as turbine blades, combustion chambers, etc. Composite coating is used to manufacture high-temperature components such as turbine blades for aircraft enginesAutomobile manufacturing:TiC reinforced FeAl composite coating can be used for automotive components such as piston rings, gears, etc., to improve their wear resistance and service life.Tools and molds:This coating is also suitable for tool and mold manufacturing, improving the cutting performance of tools and the durability of molds.Energy industry:In the energy industry, this coating can be used for high-temperature components of power generation equipment to improve equipment efficiency and reliability. The application of TiC powder in laser cladding TiC reinforced FeAl intermetallic compound composite coatings can not only improve the physical properties of the coating, but also broaden its application scope in multiple industrial fields, which is of great significance for industries that require high-performance coatings, such as aerospace, automotive, and manufacturing. The wear resistance and corrosion resistance of TiC reinforced FeAl composite coating are enhanced, making it an ideal choice for engine parts and tool steel components under harsh operating conditions. About RBOSCHCORBOSCHCO is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa,Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, RBOSCHCO dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Titanium Carbide TiC Powder, please send an email to: sales1@rboschco.comHot tags:semiconductor, semiconductor material

Jul 25

2024

Exploring the Classification and Applications of 3D Printing Powders

3D Printing Powder, also known as 3D printing powder, is a key material used in the 3D printing process, especially in printing processes that utilize powder bed fusion technology. These technologies include selective laser sintering (SLS), electron beam melting (EBM), direct metal laser sintering (DMLS), and binder jetting, among others. 3D Printing PowdersClassification of 3D Printing PowderMetal powder:Metal powders are materials used for metal 3D printing, typically made from titanium, stainless steel, aluminum alloys, cobalt chromium alloys, and other materials. Metal powders require high sphericity to ensure good flowability and powder uniformity. These powders are melted and layered under the action of laser or electron beam to form parts.Plastic powder:Plastic powders, such as nylon (PA), polycarbonate (PC), polyether ketone ketone (PEKK), etc., are used in technologies such as SLS and binder jetting. They melt at lower temperatures and are suitable for the production of non-metallic parts.Ceramic powder:Ceramic powders, such as alumina and zirconia, are used to manufacture parts with good high-temperature resistance and strong chemical stability. They are commonly used in industrial and medical applications.Composite powder:Composite powders may contain a mixture of metals and ceramics, or reinforcing phases such as carbon fibers or glass fibers embedded in a metal matrix. These powders are used to improve the mechanical properties of the parts. Characteristics and Requirements of 3D Printing Powder3D printing powders need to meet certain particle size distribution, flowability, chemical purity, and sphericity requirements. These characteristics directly affect print quality and efficiency:Particle size distribution: Uniform particle size helps to achieve better powder spreading effect.Liquidity: High fluidity powders are easy to spread, reduce voids, and increase density.Chemical purity: High purity powder can ensure the performance of the final product.Sphericity: Powder with high sphericity is evenly spread to reduce printing defects Some main application areas of 3D printing powderAerospace:In the aerospace industry, 3D printed powders are used to manufacture high-performance metal components such as engine parts, heat exchangers, and structural components. These components are typically made of titanium alloy, nickel based alloy, or aluminum alloy powder and printed using techniques such as selective laser melting (SLM) or electron beam melting (EBM) to achieve lightweight and high-strength requirements.Medical and health care:The medical field utilizes 3D printed powders to produce personalized medical devices, implants, and surgical tools. For example, titanium alloy powder is used to print bone substitutes, while biocompatible plastic powder is used to produce surgical guides and customized prosthetics. In addition, adhesive jetting technology combined with bioink powder can be used for bioprinting tissues and organs.Automotive industry:The automotive industry uses 3D printed powders to rapidly manufacture prototypes and functional components, such as cooling system components, engine cylinder heads, and body parts. These applications can use metal powders or high-performance plastic powders, such as polyamide (PA) and polycarbonate (PC).Manufacturing industry:In the manufacturing industry, 3D printed powders are used to produce complex geometric shapes of molds, fixtures, and fixtures, as well as small mechanical parts. These parts can be printed with metal or plastic powder to meet different strength and temperature resistance requirements.Jewelry and Fashion:Jewelry designers use precious metal powders such as gold, silver, and platinum, as well as colored plastic powders to print fine jewelry prototypes or finished products. These powders can provide high levels of detail and surface smoothness.Architecture and Construction:In the field of architecture, 3D printing powders can be concrete, cement, or special building material powders used to print large structures such as walls, bridges, and even entire buildings.About RBOSCHCORBOSCHCO is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa,Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, RBOSCHCO dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for 3D printing powder, please send an email to: sales1@rboschco.comHot tags:semiconductor, semiconductor material

Jul 19

2024

Unveiling the Miracle of Silicon Nitride (Si3N4) Powder: A Game Changer for Advanced Materials

In the dynamic field of advanced materials, silicon nitride (Si3N4) powder has become a shining star, catalyzing innovation in different industries. This special material is renowned for its excellent thermal stability, hardness, and chemical resistance, and is redefining standards in fields ranging from aerospace to biomedical engineering. Silicon Nitride Si3N4 PowderOne of the most significant advances in the aerospace field involves the use of Si3N4 powder in engine component manufacturing. These components are designed to withstand extreme temperatures and pressures, benefiting greatly from the inherent characteristics of silicon nitride. By integrating Si3N4 powder into composite materials, engineers can manufacture lighter and stronger parts, significantly improving the fuel efficiency and overall performance of aircraft engines. In the biomedical field, Si3N4 powder plays a crucial role in the manufacturing of next-generation implants. The biocompatibility and antibacterial properties of silicon nitride make it an ideal choice for surgical tools and orthopedic implants. Recent studies have shown that Si3N4 based implants, due to their superior biological integration, not only reduce the risk of infection, but also promote faster healing. In addition, the aesthetic appeal of silicon nitride makes it the preferred choice for dental applications, such as crowns and bridges. Silicon nitride powder has also caused waves in the electronics and semiconductor industries. Its ability to serve as a high-quality dielectric layer in semiconductor devices is fundamentally changing chip design. The Si3N4 thin film deposited by chemical vapor deposition (CVD) can produce thin film capacitors and gate dielectrics, which helps to miniaturize and improve the performance of electronic devices. As researchers and engineers continue to discover new applications and optimize existing ones, the future of silicon nitride looks exceptionally bright. The continuous pursuit of materials that can provide excellent performance under challenging conditions has driven a higher demand for Si3N4 powder than ever before. As we move forward, silicon nitride will undoubtedly remain at the forefront of advanced materials science, paving the way for innovation that was once considered in the field of science fiction. About RBOSCHCORBOSCHCO is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa,Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, RBOSCHCO dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Silicon Nitride Si3N4 Powder, please send an email to: sales1@rboschco.comHot tags:semiconductor, semiconductor material

Jul 11

2024

Revolutionary Technology of Aluminum Nitride (AlN) Powder: The Next Big Event in Advanced Materials

In the constantly evolving world of advanced materials, aluminum nitride (AlN) powder has become a game changer, providing a wide range of applications in various industries. Its excellent performance, including high thermal conductivity, high electrical resistivity, and excellent dielectric properties, makes it a highly sought-after material in the fields of semiconductor manufacturing, electronics, and aerospace engineering. Aluminum Nitride AlN powder One of the most important advances in aluminum nitride powder technology involves the optimization of its synthesis process. Recent studies have shown that by improving physical vapor transport methods, researchers can grow threaded AlN whiskers with unprecedented accuracy and quality. This breakthrough has opened a new door to creating composite materials with enhanced mechanical and thermal conductivity. It is expected to completely change the performance of electronic devices and thermal management systems. In addition, precise control of particle size distribution in the production process of AlN powder has been proven to greatly affect the performance of filled silicone rubber, thereby improving the performance of thermal interface materials and other high-demand applications. Unknown hero in the semiconductor and electronics fields: AlN powder has high thermal conductivity - up to 220 W/mK, about ten times that of aluminum oxide - and is a key component in semiconductor manufacturing. Its compatibility with silicon substrates and ability to maintain performance at high temperatures make it an indispensable material for manufacturing high-power electronic devices. From LED lighting to power electronics and telecommunications equipment, AlN is achieving smaller, more efficient, and more robust technologies. Promoting the aerospace and defense industry: In addition to electronic products, aluminum nitride powder plays a crucial role in the aerospace and defense fields. Its high hardness, high modulus, and oxidation resistance make it an ideal choice for protecting coatings and components under extreme conditions. The development of AlN-based ceramic sintered bodies provides a lightweight and durable solution for aerospace applications, ensuring safety and efficiency. Sustainability and environmental impact: As the industry strives to seek more sustainable practices, aluminum nitride powder stands out due to its potential to reduce energy consumption and waste. By improving the thermal management of electronic devices, AlN helps to reduce operating costs and extend product lifespan. In addition, its use in energy-saving lighting and renewable energy systems supports global efforts to address climate change. The future of aluminum nitride (AlN) powder is bright, and the current research focus is on expanding its application range and optimizing its performance. From next-generation semiconductors to cutting-edge composite materials, AlN will play a core role in shaping the future technological landscape. With the continuous innovation of manufacturers and scientists, the potential of AlN to transform the industry and contribute to a more sustainable future is becoming increasingly evident. About RBOSCHCORBOSCHCO is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa,Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, RBOSCHCO dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Aluminum Nitride AlN powder, please send an email to: sales1@rboschco.comHot tags:semiconductor, semiconductor material

Jul 10

2024

Innovation in Materials Science: Spherical tungsten powder occupies a central position

In the constantly evolving world of advanced materials, a product has quietly changed the industry from aerospace to medical devices - spherical tungsten powder. This carefully crafted material, with its unique performance and multifunctional applications, is now at the forefront of technological progress. Spherical tungsten powder is a special form of tungsten known for its high density, excellent mechanical properties, and high melting point. Unlike traditional powders that typically exhibit irregular shapes and sizes, spherical tungsten powders have uniform spherical particles and several advantages over traditional powders. These measures include improving fluidity, reducing the porosity of the final product, and exhibiting excellent sintering characteristics. Spherical tungsten powder Spherical tungsten powder is manufactured using advanced gas atomization technology to ensure consistent particle size distribution, making it an ideal choice for additive manufacturing processes such as 3D printing. Its use in these processes enables the creation of complex geometric shapes with high precision and strength, which traditional manufacturing methods previously could not achieve. The aerospace sector has always been one of the main beneficiaries of spherical tungsten powder. Due to its high density, this powder is used to produce balance weights for aircraft components, ensuring stability and efficiency during flight. In addition, this powder can withstand extreme temperatures, making it a critical component for engine components and radiation protection. In the medical field, spherical tungsten powder is used for radiation shielding, especially in the development of high-quality X-ray and CT scanning equipment. Its radiation absorption characteristics make it indispensable in creating a safer environment for patients and healthcare workers. In addition, this powder plays an important role in the manufacturing of medical implants, and its biocompatibility and strength contribute to successful surgical outcomes. The recent headline news reveals a groundbreaking collaboration between leading aerospace manufacturers and tungsten powder producers. This partnership aims to develop next-generation aircraft components using spherical tungsten powder, with the goal of achieving unprecedented levels of fuel efficiency and performance. Experts predict that this may mark a new era in aviation technology, laying the foundation for innovation in future commercial and military aircraft design. In addition, medical researchers have announced promising preliminary results in the targeted treatment of cancer using spherical tungsten powder. By encapsulating chemotherapy drugs in tungsten microspheres, doctors can directly deliver treatment to the tumor site, minimizing side effects and improving treatment effectiveness. With continuous innovation in the industry, the demand for high-quality spherical tungsten powder is expected to increase. With its outstanding performance and continuously expanding application range, this material is expected to play a key role in shaping the future of various industries. Please continue to follow us on the latest developments in the world of advanced materials, where spherical tungsten powder is at the forefront. About RBOSCHCORBOSCHCO is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa,Tanzania,Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic, Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, RBOSCHCO dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Spherical tungsten powder, please send an email to: sales1@rboschco.comHot tags:semiconductor, semiconductor material

Jul 09

2024

more>>

Hot Products

Hot News

Surfactant

Semi-branched C12-13 Alcohol ethoxylates CAS 160901-19-9

Company Profile

Payment Term

FAQ

Inquiry

Semi-branched C12-13 Alcohol ethoxylates Properties