Caprylamidopropyl betaine

(Caprylamidopropyl betaine)

Overview of Caprylamidopropyl Betaine

Caprylamidopropyl Betaine is a zwitterionic surfactant commonly used in maquillage and personal care products such as shampoo, shower gel, and skincare products. It has excellent gentleness and stability, providing good cleaning and wetting effects while maintaining the skin's water-oil balance. The abbreviation for Caprylamidopropyl Betaine is CAPB, which is widely popular due to its mildness and high efficiency.

Characteristic of Caprylamidopropyl Betaine

1. Mildness: Caprylamidopropyl Betaine has excellent mildness and low irritation to the skin and eyes. Therefore, it is widely used in cosmetics and personal care products, such as liquid shampoo, shower gel, facial cleanser, etc., and can gently clean without causing excessive skin irritation.

2. Good solubility: Caprylamidopropyl Betaine is easily soluble in water, forming a stable, transparent solution. This good solubility makes it easy to mix with other ingredients and evenly distribute in various formulations, ensuring the stability and consistency of the product.

3. Excellent foaming and foam stability: Caprylamidopropyl Betaine has good foaming and foam stability and can form rich and delicate foam in an aqueous solution. This makes it an ideal choice in many applications, such as shampoo, shaving foam, etc., which can provide a comfortable use experience and cleaning effect.

4. Compatibility with multiple components: Caprylamidopropyl Betaine is compatible with multiple chemical components and can work synergistically with other surfactants, thickeners, preservatives, etc., to form a stable formula. This compatibility makes it widely applicable in developing cosmetics and personal care products.

5. Adjusting surface tension: Caprylamidopropyl Betaine can effectively reduce the surface tension of water, making it easier for aqueous solutions to wet and penetrate various surfaces. This characteristic makes it have good application effects in cleaning and wetting.

6. Ecological friendliness: Caprylamidopropyl Betaine is biodegradable and has a minimal environmental impact. This gives it a competitive advantage in green and environmentally friendly cosmetics and personal care.

Application of Caprylamidopropyl Betaine

1. Personal care products:

Shampoo and conditioner: As a mild surfactant, it can effectively clean hair and scalp while maintaining natural moisture.

Shower Gel and Facial Cleansing Products: Its mildness makes it the main ingredient in many shower gels and facial cleansers, which can clean the skin without damaging its natural barrier.

Skincare products, including lotion, face cream, etc., can moisturize, making the skin softer and smoother.

Caprylamidopropyl Betaine can be used as a personal care product

2. Household cleaning products:

Detergent: Due to its mild nature and good cleaning ability, Caprylamidopropyl Betaine is often used to make various detergents, such as laundry detergent, hand sanitizer, etc.

Dishwasher detergent: Dishwasher detergent can effectively remove oil stains and food residues while protecting tableware from damage.

Caprylamidopropyl Betaine can be used as a cleaning product for writers

3. Textile and dyeing industry:

Fabric softener: This can make fabric softeners, making clothing softer and more comfortable.

Printing and dyeing auxiliaries: The printing and dyeing process can serve as an auxiliary to improve the printing and dyeing effect.

Caprylamidopropyl Betaine can be used in the textile and printing and dyeing industries

4. Other industrial applications:

Cosmetics: As a formula ingredient in cosmetics, it increases the stability and skin feel of the product.

Pesticides and fertilizers: In the agricultural field, they are sometimes used as adjuvants for pesticides or fertilizers to improve the application effect of products.

Company Profile

NANOTRUN(www.rboschco.com) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.If you are looking for high-quality Caprylamidopropyl Betaine, please feel free to contact us or click on the needed products to send an inquiry. 

Payment Term

L/C, T/T, Western Union, Paypal, Credit Card etc.

Shipment Term

By sea, by air, by express, as customers request.

Storage Conditions:

1. Temperature control: It should be stored in a dry, cool, ventilated, and non-direct sunlight area, away from sources of fire. The ideal storage temperature is usually between 5 ° C and 30 ° C to ensure product stability and extend shelf life.

2. Container selection: A tightly sealed container should be used to store Caprylamidopropyl Betaine to prevent the entry of air, moisture, and other pollutants. It is usually recommended to use covered plastic or metal drums to store such chemicals.

3. Avoid mixing: Caprylamidopropyl Betaine should be stored separately from other chemicals to avoid mixing or chemical reactions. At the same time, ensure that the storage area is clearly labeled to prevent misuse or misoperation.

4. Moisture and moisture prevention: Due to Caprylamidopropyl Betaine being a chemical substance sensitive to humidity, special attention should be paid to moisture and moisture prevention during storage. Desiccants or hygrometers can be used to monitor and control the humidity of the storage environment.

5. Regular inspection: The stored Caprylamidopropyl Betaine should be checked regularly to ensure it has not deteriorated, clumped, or other abnormal conditions. If any abnormalities are found, they should be immediately stopped and dealt with.

6. Compliance with safety regulations: When storing and handling Caprylamidopropyl Betaine, relevant safety regulations and operating procedures should be strictly followed to ensure the safety of personnel and the environment.

FAQ

Q1

How does Caprylamidopropyl Betaine perform in cleaning products as a surfactant, and what are its advantages compared to other surfactants?

Re:Caprylamidopropyl Betaine performs well in cleaning products, with its unique molecular structure endowing it with excellent wetting, emulsifying, dispersing, and cleaning abilities. Compared with other traditional surfactants, Caprylamidopropyl Betaine has higher stability and lower irritation. It can still maintain good performance under hard water conditions and does not easy to form precipitation or gel, making cleaning products more stable and effective. In addition, Caprylamidopropyl Betaine also has good skin compatibility, reducing the risk of skin irritation and allergies.

Q2

How gentle is Caprylamidopropyl Betaine, and is it suitable for sensitive skin?

Re:Caprylamidopropyl Betaine is known for its gentleness, with a pH value similar to that of the skin, reducing irritation to the skin. Its unique structure gives it a good balance in cleaning and moisturizing without excessively depriving the skin of natural oils, thus maintaining its moisture and comfort. Therefore, Caprylamidopropyl Betaine is suitable for use on sensitive skin and can diminish the risk of skin discomfort and allergic reactions.

Q3

What is the stability and operability of Caprylamidopropyl Betaine during the preparation process, and is it suitable for large-scale production?

Re:During the preparation process, Caprylamidopropyl Betaine exhibited good stability and operability. It is easy to dissolve and disperse in various solvents, making it easy to process and prepare. In addition, its chemical properties are stable and not easily affected by factors such as temperature, pH value, and light, ensuring the stability of the production process and the consistency of product quality. Therefore, Caprylamidopropyl Betaine is suitable for large-scale production and can meet the cosmetics and personal care market needs.

Q4

How does Caprylamidopropyl Betaine perform in terms of environmental protection? Is it easy to degrade, and is it environmentally friendly?

Re:Caprylamidopropyl Betaine performs well in environmental protection, and the hydrophilic groups in its molecular structure make it easy to degrade. Under appropriate conditions, Caprylamidopropyl Betaine can be broken down by microorganisms into harmless substances, reducing its impact on the environment. In addition, it does not contain elements such as phosphorus and nitrogen that can easily lead to eutrophication in water bodies and has no toxic effects on aquatic organisms. Therefore, Caprylamidopropyl Betaine can be considered an environmentally friendly surfactant.

Q5

How about the foam performance and stability of Caprylamidopropyl Betaine? Can it provide rich foam and lasting stability?

Re:Caprylamidopropyl Betaine has good foam performance and stability and can quickly produce rich, delicate, and durable foam in water. The hydrophobic part and hydrophilic part of its molecular structure work together to make the foam more stable and not easy to break. This excellent foam performance enables Caprylamidopropyl Betaine to provide a more effective cleaning effect in cleaning products, while giving users a pleasant use experience.