Properties and Applications of Ti6Al4V TC4 Powder

(Properties and Applications of Ti6Al4V TC4 Powder)

Introduction to Ti6Al4V TC4 Powder
TC4 titanium alloy, also called

Ti-6Al-4V is a titanium alloy

It is a member of the type (a+b), titanium alloy. It exhibits excellent mechanical properties. The structure is stable and has high toughness. You can improve the quality of this alloy by using hot pressure, quenching, or aging. It is 50% to 100% stronger after heat treatment than it is after annealing. This material has a high temperature resistance and is capable of working at temperatures up to 400500 for extended periods.

TC4 has excellent low-temperature performance. It is still strong below -196 so it can be used to make low-temperature high pressure vessels like liquid hydrogen fuel tanks that are used in rockets and missiles.

The Physicochemical Characteristics of Ti6Al4V TC4 Powder

The titanium alloy material TC4 is lightweight and has exceptional mechanical properties. Additionally, it is low in thermal conductivity and non-magnetic.

The properties of titanium-based metals, a novel type of metal that is made from titanium, are dependent on the other elements, such as nitrogen, carbon, hydrogen and oxygen. You can find it in:

1 – High strength. Titanium has an average density of 4.51g per cubic centimeter. That is 60 percent less than steel. While pure titanium’s density is comparable to steel’s, the strength of certain high-strength alloys of titanium alloys can be up to twice that of steel. This means that titanium alloy’s specific strength is greater than any other metal structural material.

2, High temperature resistance. The titanium alloy will still retain its strength at moderate temperatures. It can be used for extended periods at temperatures of 450-500.

Three, good resistance to corrosion. This alloy of titanium works well in moist environments.

4, good low-temperature performance. At low or ultra-low temperatures, titanium alloys still retain their mechanical properties. TA7 titanium alloy has a high low temperature performance and low gap elements. It can also maintain some plasticity below -253. Also, titanium alloy makes a great low-temperature structural metal.

5 – High chemical activity. The chemical activity of titanium is high and it reacts well with nitrogen, oxygen, hydrogen and CO. If the carbon content in titanium is higher than 0.2%, hard TiC forms. At high temperatures, a hard TiN is formed. If the carbon content of titanium is greater than 600, it can absorb oxygen to form a hardening layer. High temperatures can cause a hardening layer to form. This is due to an increase in hydrogen. Inhalation can make the surface hard and brittle to 0.1-1.15mm deep. The surface hardness can also reach 20%-30%. Chemical affinity for the surface of friction is strong and it can be adhered to easily.

6, low thermal conductivity elasticity. Thermal conductivity in titanium is 1/4, 1/2, and 1/15 of iron respectively. Different titanium alloys have a thermal conductivity around half of that. Titanium has an elastic modulus about half that of steel. It is also very stiff and easily deformable. It’s not suitable to be used in thin-walled components and slender rods.

Properties Ti6Al4V Powder, TC4 Powder

Additional Names

Ti6Al4V, TC4 Powder

CAS No.

N/A

Formula compound

TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19,

Ti40,Ti60,TiAl(Ti36Al,Ti48Al2Cr2Nb)

Molecular Weight

N/A

Appearance

grey powder

Melting Point

N/A

Boiling Point

N/A

Density

N/A

Solubility in water

N/A

Get the exact Mass

N/A

3D Printing Ti6Al4V TC4 Powder

Applications for Ti6Al4V Powder and TC4 powder

High-performance applications like aerospace and automotive engineering, as well as medical device manufacturing, use Ti6Al4V.

Aerospace: Components for jet engines

Fabrication: Industrial turbines

Car: muffler

Medical: implants, artificial bones

In the Petrochemical Industry: The TC4 Titanium Rods have excellent corrosion resistance and are totally inert. The electrolyte for electrolytic Mn02 is a neutral solution of MnSO4 which makes it necessary that the electrode resists sulfate erosion. Telegraph machines made out of graphite or lead alloy have a bad effect. When the anode switches to titanium, it isn’t corroded anymore and can be used as a semi permanent device.

This rod of TC4 Titanium alloy has excellent resistance to most organic acids and organic media with the exception of formic acid, oxalic acid, and formic acid. Additionally to titanium resisting corrosion from methanol and organic alcohols, ketones, and aldehydes it also resists corrosion.

In the petrochemical sector, for example, acetic acids are made from acetaldehyde. The corrosion of stainless steel equipment is seriously caused by acetic, acetaldehyde and chloride. To address this problem, titanium material can be used. For example, acetone can be produced from propylene or can be manufactured using titanium-producing facilities. Japan had a plant that could produce 30,000 tons per annum of Acetone, and it used 40 tons of Titanium.

TC4 Titanium rods can withstand wet H2S and wet SO4 gas. Ammonia is also resistant. Titanium should only be used in low-hydrogen media, pure oxygen, or small quantities of hydrogen.

In the oil refining sector, for example, equipment often gets corroded by H2S and NH8, as well as sulfide or chloride. However, titanium equipment can fix this problem. The majority of Titanium equipment is used in the petroleum refining industry, including condensers and air coolers as well. It is a great material to resist corrosion in the production of ammonia/urea.

Major Supplier of Ti6Al4V Powder, TC4 powder

Mis-asia Technology Co. Ltd., (Mis-asia), is a reliable global supplier and manufacturer of chemicals. With over 12 year’s experience, Mis-asia has been providing high-quality chemical products. This includes silicon powder. Graphite powder. Zinc sulfide. Calcium nitride. 3D printing powder.

High-quality products are what you want

Ti6Al4V Powder, TC4 Powder

Please feel free and contact us to send an enquiry. (brad@ihpa.net)

(Properties and Applications of Ti6Al4V TC4 Powder)